中文    English
  0519-88817673
 
  • WL Belt Calciner

Date : 2014/9/2 14:04:11 | Hit :

  Inquiry Now

Working Principle of Belt Calciner:

Workpiece(products) is put on the feeding part of continuous-working belt and will be moved forward into each working zone along with belt.Each zone has separate hot air circulation and temperature control.After process such as temperature ramping,stabilization and cooling etc,workpiece will be finally discharged at product outlet thus finished the process of drying,calcining,heat treatment and cooling.The residence time in the calciner could be adjusting belt speed.

Charcateristice of Calciner:

Products are uniformly heated by calcining with high temperature and high speed hot air。

Each unit has separate hot air circulation with less heat loss.Also the temperature can be controlled

Multi-step ramping and cooling of temperature will be adopted so the no sudden and steep heating or cooling will be occurred.separately;

Available for integration with pre-dryer for completion the drying and calcining process

Due to uniform heating and temperature stabilization,the quality of final catalyst is stable and reliable。

Key technical data could be preset on the control screen with automatic and continuous operation thus makes sure the quality of product and makes mass production available.

Multiple models of calciner or predryer +calciner are available within belt width of 600-1600mm and length of 6-30min accordance with different size and outputs of catalyst.

Changzhou FanQun drying equipment Co., LTD

Online service

Business consulting

快三彩票官网 快乐时时彩 聚福彩票官网 明仕彩票注册 上海快3走势图 099彩票官网 快三彩票官网 极速3D彩票 099彩票开户 099彩票官网